Animal Crossing – Multi-smartphone cover

● Estimated dimensions of smartphones that fit this product
・ Up to approximately 150 mm in height x 75 mm in width x 10 mm in thickness.
-The camera position is from the top of the back to about 37 mm at the bottom of the lens.
(Smartphones with a flash under the camera have a length of 37 mm up to the bottom of the flash.)

-Cannot be used with foldable models.
-Smartphones that can be attached have a flat back surface. Do not use if the sticking surface is AFP (anti-fingerprint) treated, or if the sticking surface is curved or uneven, the adhesive strength will be extremely reduced.
-For models with an earphone jack or charging connector outlet on the left side of the main unit, those terminals cannot be used with the cover closed.
-For models with an earphone jack, charging connector, fingerprint authentication sensor, speaker, etc. on the back, those functions cannot be used when this product is installed.

● Product package size (cm)
(approx.) 15.4 x 9 x 1.5

● Country of origin
China

・ This product does not completely prevent scratches and dirt on your smartphone. In addition, it does not protect your equipment from dropping, impact, or submersion.
・ Do not use if damaged or deformed.
-Before mounting, wipe off any dirt on the back of the smartphone or where the adhesive part of this product is attached. In particular, please note that oils such as sebum will cause a significant decrease in adhesive strength.
-Adjust the sticking position depending on the model.
・ If you are using a smartphone with the back cover removed, be careful not to drop the smartphone body due to the cover removed.
・ When removing the smartphone, do not apply excessive force and remove it slowly. Forcibly pulling it may cause damage to the adhesive parts.
・ If the adhesive surface of the adhesive sheet becomes dirty and the adhesive strength decreases due to repeated use, remove the dirt with cellophane tape, etc., or moisten a fluff-free cloth such as gauze, wipe off the dirt, and dry it sufficiently. Please use from.
・ Depending on the size of the card, it may not fit in the card pocket.
・ Do not leave the product in an extremely hot place such as around a heating device. It may cause deformation or deterioration.
・ It may be transferred during flash photography.
-If you use the IC card in the card pocket of this product, the standby radio waves of the main unit may interfere with each other, causing a reading error with the card reader or affecting the data on the IC card.
-Since this product uses magnets, keep it away from magnetic storage products such as TVs, watches, personal computers, video tapes, and magnetic cards (cash cards, credit cards, etc.). Functional malfunction due to magnetism may occur.
・ The color may fade or fade due to high humidity such as water or sweat, direct sunlight, or ultraviolet rays.
-Color transfer may occur if the product comes into contact with printed matter or materials that use dyes (such as denim).
-Since it is a cloth material, sweat and dirt on your hands are easily transferred, but please note that we are not responsible for dirt on this product.
-To remove dirt, wipe it off with a cloth dampened with water or a diluted neutral detergent.
・ Cannot be washed.
・ If chlorine bleach adheres, the surface may deteriorate or discolor, so please avoid it.